Home
Search Products
Products Center
Technical Services
News&Events
SUPLET?
Contact US

Soldering BMP

BMP Soldering


For through-hole modules of BMP, the pins should exceed the PCB by 1 to 2mm.

For wave soldering, it is necessary to press the module with a test jig to avoid a gap exceeding 0.2mm between the module and the application board.

image.png

The soldering temperature of the BMP pin should not exceed 270 ℃ and the soldering time should not exceed 10 seconds.

When the soldered BMP is disassembled from PCB, the disassembly method should be strictly controlled. If using the disassembled BMP again, to confirm that the BMP is in a normal state, first. If in doubt, contact SUPLET Technical Support Engineer.


COPYRIGHT 2019 ALL RIGHTS RESERVED SHENZHEN SUPLET CO., LTD.  |  京ICP備05064032號-1   POWERBY:kbyun.com
精东app破解版安卓-精东视频下载-精东视频app最新版下